ES-FH
23/08/2024
ES-SD8
Sensor wiring is a challenge on control panels. for wiring a sensor, we need at least 3 terminals. Two for power supply and one for sensor output. So for ease wiring we need 3 level terminal block and after then we need jumpers to power supply terminals.
ES-SD8 is a new and easy solution for sensors easy wiring on control panels.
$9.00 – $10.00
8CH SENSOR DISTRIBUTION BOARD, DIN RAIL MOUNTED
Wiring sensors has always been a challenging aspect of assembling control panels and automation systems. This is because, on one hand, a supply voltage must reach all sensors, and on the other hand, to prevent disturbances, the sensor shields must be grounded. This becomes more evident when the number of sensors increases.
The ES-SD8 sensor distribution card is designed and manufactured for the easy wiring of 8 sensors in three models. The general model is suitable for all three-wire sensors (analog and digital). The PNP and NPN models are used for digital sensors and have an indicator for each output. It’s sufficient to supply power and ground to the distribution card once, and connect the sensors to the spring-type terminals in the shortest possible time.
PNP or NPN input type
General purpose 8 ch sensor distribution board
ESP sensor distribution board acts like 4 level spring type terminal block with indicators and built in jumpers for supply and earth lines.
| Weight | 80 g |
|---|---|
| Dimensions | 80 × 45 × 90 mm |
| Input type | PNP, NPN, General purpose |
| Channels | 8 |
| Terminal nominal current | 2A |
| Indicator | General purpose input type : NO |
| Ambient temperature | -40 to 70°C |
| Max Humidity | 85% |
Reviews
There are no reviews yet.